Here is a New Set of Fleet Flex truckside wiring for a Western Ultramount Plow, Fisher Minute Mount 2, Blizzard PowerHitch 2 or SnowEx truck plows. This is all brand new, Genuine OEM Western/Fisher/SnowEx Fleet Flex truckside wiring for plows with halogen plow lights (this will work with LED plow lights too, but addtional wiring will need to be purchased separately). It has the 4 hole plug for the handheld or joystick controller. Make sure you have the 4 pin controller that matches the plug shown in the pictures. This is a 3 port isolation module with a 2 plug system (battery cable plug with 2 smaller holes in the middle and 11 pin headlight plug). This wiring is for vehicles with H13 headlight bulbs. Check to make sure your vehicle has H13 headlight bulbs. If your vehicle does not have H13 bulbs, this harness will not work for your truck. This wiring will work for 05-07 Ford Superduty and 09-16 Ford Superduty trucks with H13 headlights (08 Superduty trucks require the soft start adapter that is not included in the wiring being sold in this listing). To check what style headlights you have, take a look at the lense of the headlight from the front of the truck. It should have the headlight stamped on the front of the lense. ***BEFORE BUYING***, use the Quickmatch feature on the Western Website or the eMatch feature on Fisher's website to make sure this is the right harness for your truck and plow. Part numbers: The isolation module is part # 29070-1. Fleet Flex control harness is 28587. Port A is 26357 and ports B and C are 28986. Battery cable is 72168 and 90730 fuse kit. When using Western Quickmatch or Fisher Ematch, they list the plug-in harness kit as 29049 which is made up of 26357 (port A) and 28986 (ports B and C). What you see in the pictures is what you will be receiving. Thanks for looking. Feel free to ask any questions.