Here is a new aftermarket bolt kit for the Boss RT3 (LTA04770D) mount for a 03-18 Dodge Ram 2500, 3500 pickups. This bolt kit would also work for earlier versions of the LTA04770D mount (LTA04770, LTA04770B, and LTA04770C). The Boss bolt bag kit for this mount is part number HDW04835. The Boss bolt bag kit HDW04835 does not include item 101 (nut bar 1/2", qty 2), but I have included them in this kit. Also, not included in Boss bolt bag kit HDW04835 is item 102 (bolt plate 5/8"). In this kit, additional 5/8" washers are included to be used in place of item 102 if additional spacers are needed. In the mounting instructions, Boss specifies that either item 102 or washers can be used to gain the appropriate spacing needed. All hardware is new and meets or exceeds the specified requirements from Boss for the hardware. These are the bolts you would need to bolt the mount together and to the truck frame. The finish on the hardware you receive may be different than the finish on the hardware in the pictures. The last 2 pictures show the Boss mount diagram, and are for reference only-make sure they match the mount that you have. You will be receiving items A-K and item 101, as shown in the diagram in the last picture. Items A-K make up the Boss fastener kit HDW04835. One final note: Boss specifies that some of the earlier trucks (I think 03-09) can use a 1/2" bolt in place of the 5/8"-11 x 4" bolt (item J-see diagram). Item H is a 1/2"-13 x 4 1/2" bolt that can be used in place of item J if you have one of the earlier trucks. I have included 2 extra 1/2" washers in the kit if you need to use the 1/2" bolt in place of the 5/8" bolt on a earlier truck. Thanks for looking and feel free to ask any questions.